Jump to content


WELCOME TO CERTKNOWLEDGE

Skype : certknowledge

 

CCIE R&S SP SECURITY DATACENTER COLLABORATION WIRELESS
Written PASS PASS PASS PASS PASS NOT STABLE 
Lab PASS PASS PASS NOT STABLE PASS PASS

 

Last Updated : November 21st 2018


Content Spy


Photo

TICKET 7

ONLY REAL FAULT

3 replies to this topic

#1 OFFLINE   master

master

    Advanced Member

  • Users
  • 44 posts
  • 0 thanks

Posted 05 May 2012 - 06:33 AM

HI GUYS,

PLEASE PUT & DISCUSS REAL FAULTS WHICH YOU HAVE GOT IN THE REAL EXAM

FAULT ****** (HOW YOU CATCHED THE FAULT)

TROUBLESHOOTING (WORKED) **** (HOW IT WORKED)

PLEASE REPLY ONLY IF YOU HAVE SOLVED THE QUESTION IN REAL EXAM

TICKET 7

7. On R27, interface Ethernet0/0 was shutdown by someone.
Fix the problem so that EEM can be triggered with "no shutdown" action..... =====> (ONLY REPLY IF YOU HAVE SOLVED THIS QUEST IN REAL LAB)

ONLY PUT WHAT YOU FOUND THE PROBLEM/HOW YOU HAVE TROUBLESHOOT/ WHAT YOU DID TO SOLVE IT

Attached Files



#2 OFFLINE   RandSguy

RandSguy

    Member

  • Users
  • 10 posts
  • 0 thanks

Posted 06 May 2012 - 02:30 AM

changed the applet to
event syslog pattern " interface ethernet0/0, changed state to administratively down " from event syslog pattern " interface ethernet0/0, changed state to down"

action 2.0 cli command "conf t"

pls test by shuting down and bringing back up the interface

#3 OFFLINE   bosheaka

bosheaka

    Newbie

  • Users
  • 1 posts
  • 0 thanks

Posted 06 May 2012 - 08:53 AM

in this question he is asking to make f0/0 always up but in in his sys log was mensioning f0/1 so you have to correct it and corect the line
event syslog pattern " interface fastethernet0/0, changed state to administratively down "
action 1 cli command "enable"
action 2 cli command "config t"
action 3 cli command "inter f0/0"
actino 4 cli command "no shu"
------------------------------
the best thing to solve this question first copy all the configuration regarding eem
" sho run | sec event" copy to a notepad and try to edit and than paste it agin
to veryfiy your solution
int f0/0
shu <<<< wait and check the interfase is it up or down and don't forget to enable the logging console debug

#4 OFFLINE   master

master

    Advanced Member

  • Users
  • 44 posts
  • 0 thanks

Posted 06 May 2012 - 12:34 PM

Hi,


Really appreciated thats how we all can clear the test and came on same page.


WE ONLY NEED


PROBLEM (YOU FOUND IN REAL ATTEMPT IN THIS TS) :-





HOW YOU HAVE SOLVED :-



CHEERS




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Organization

Community

Downloads

Test Providers

Site Info


Go to top